Some Basics of Instrument Valves


Release date:

2022-11-09

An instrument valve is a type of pipeline accessory. It is used to change the cross-section of the passage and the flow direction of the medium, controlling the flow of the conveyed medium. The sealing performance of the instrument valve refers to the ability of each sealing component of the instrument valve to prevent medium leakage, which is a very important technical performance indicator of the instrument valve.

  An instrument valve is a type of pipeline accessory. It is used to change the cross-section of the channel and the flow direction of the medium, controlling the flow of the transported medium. The sealing performance of the instrument valve refers to the ability of each sealing component to prevent medium leakage, which is a very important technical performance indicator of the instrument valve. There are three sealing parts in the instrument: the contact between the opening/closing part and the two sealing surfaces of the valve seat; the area equipped with packing, valve stem, and packing box; and the connection between the valve body and the valve cover. The first type of leakage is called internal leakage, commonly known as poor closure, which affects the valve's ability to cut off the medium. For shut-off valves, internal leakage is not allowed. The latter two types of leakage are called external leakage, where the medium leaks from inside the valve to the outside.

   Instrument Valve It has been widely used to control the transportation of water, oil, and gas, attracting the attention of market users. Specifically, Instrument Valve It has the following uses:

  (1) To connect or cut off the medium in the pipeline. Examples include gate valves, globe valves, ball valves, plug valves, diaphragm valves, butterfly valves, etc.

  (2) To regulate and control the flow and pressure of the medium in the pipeline. Examples include throttle valves, control valves, pressure reducing valves, etc.

  (3) Instrument valves can change the flow direction of the medium in the pipeline. Examples include distribution valves, three-way plugs, three-way or four-way ball valves, etc.

  (4) To prevent backflow of the medium in the pipeline. Examples include various types of check valves and foot valves.

  (5) To separate the medium. Examples include various types of steam traps and air traps.

  (6) Instrument valves can indicate and adjust liquid levels. Examples include liquid level indicators and liquid level regulators.

  (7) Other special uses. Examples include temperature control valves, emergency shut-off valves for overcurrent protection, etc.

  The main faulty parts of instrument valves include the valve body exterior, valve core, and valve seat. Regularly check the corrosion and wear condition of the inner wall of the valve body, especially for valves used under harsh process conditions such as corrosive media, high pressure differences, and cavitation. It is necessary to ensure their pressure resistance, corrosion resistance, and wear resistance. The valve core of the instrument valve plays the role of regulating and cutting off the fluid and is a movable throttling element. Therefore, it is severely affected by medium erosion, corrosion, and particle collisions, and is more prone to damage under large pressure differences and cavitation. Hence, it is necessary to check whether its parts are damaged, worn, or corroded, and whether repair or replacement is needed. The mating surface of the valve seat is key to ensuring valve closure and is subject to severe corrosion and wear. Due to medium penetration, the internal surface of the threads fixing the valve seat is often corroded and loosened. This part should be specially inspected.

  Instrument valves use analog signal regulators, also known as analog instrument valves. They determine the deviation between the analog measurement value of the controlled object's parameter and the set value, and generate an analog output signal according to certain regulation rules to drive the actuator to eliminate the deviation, keeping the controlled parameter near the set value or changing according to a predetermined rule. In automation instruments, instrument valves are often used to synthesize the output signals of detection instruments to control the production process. The regulated parameters include temperature, pressure, flow, liquid level, composition, etc.


Back to list →